NANUK 918 3 Up Revolver Case - Black
Need bulk order? Get a quote »
Free Returns
Free Shipping
Lifetime Warranty
Overview
Exterior Size (LxWxH)
429 mm x 328 mm x 236 mm
Interior Size (LxWxH)
378 mm x 249 mm x 218 mm
Volume
Case is extremely well made, durable, and I love the latches. The double sets of wheels are durable and the handles comfortable. This particular model is quite large - plenty of room inside.
I’ve been looking for a motorcycle trunk to put on my 2015 Valkyrie for years but couldn’t find anything that suited my bike until... I found the Nanuk 918. Amazing case! Top notch quality and easy transaction. Thanks Nanuk!
The 918 is very strong and has a solid seal and strong latches. I have three of these cases along with several of the 995 cases. Customer service is also very good.
Was looking for a certain size box searched every other website with waterproof boxes ordered this one because of dimensions when I received it, it was exactly as described, and I was much happier with the product than I expected
I recieved a 918 case the Quality is 100%. the fit and finish is great, I will use this case for a rc battery charger setup .If you want a Quality case this is it.
Description
NANUK 918 3 Up Revolver Case
Overview
Built to organize, protect, carry and survive tough conditions, the NANUK 918 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system.
With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 918 3 Up Revolver case is favored by outdoor enthusiasts, sportsmen and sportswomen, law enforcement officers, and shooting sports enthusiasts to protect their most valuable revolvers.
The NANUK 918 3 Up Revolver case’s bulkier and deeper design is ideal revolver storage and transportation.
The high-quality, protective custom foam interior carries up to three (3) .22 caliber to .500 caliber revolvers with or without trigger locks. The NANUK 918 waterproof, dustproof and impact-resistant case accommodates revolvers with 3” to 8” barrel lengths.
The protective foam also has a pre-cut slot for a NANUK Desiccant Pack which protects revolvers from rust and corrosion caused by moisture or high humidity.
The NANUK 918 3 Up Revolver Case has two lockable options: two reinforced metal eyelets accommodate TSA-accepted case locks and TSA latch retro-fit kits which are easy to install and add an extra measure of security.
The NANUK 918 3 Up Revolver Case protective case comes with a soft grip and ergonomic handle to make it easy to transport.
It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty.
Specifications
NANUK 918 3 Up Revolver Case
Specifications
16.9 in x
12.9 in x
9.3 in
429 mm x
328 mm x
236 mm
14.9 in x
9.8 in x
8.6 in
378 mm x
249 mm x
218 mm
20.6 L
6.4 lb |
2.1 in | 53 mm
6.5 in | 165 mm
Min -20°F (-29°C ) | Max 140°F (60°C)
40 lb | 18.1 kg
0.3 in | 7.62 mm
Lightweight NK-7 resin
Yes
Certifications
Downloads
NANUK 918 3 Up Revolver Case
Downloads
918 NANUK Spec Sheet-fr.pdf
NANUK 918 3 Up Revolver Case
Overview
Built to organize, protect, carry and survive tough conditions, the NANUK 918 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system.
With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 918 3 Up Revolver case is favored by outdoor enthusiasts, sportsmen and sportswomen, law enforcement officers, and shooting sports enthusiasts to protect their most valuable revolvers.
The NANUK 918 3 Up Revolver case’s bulkier and deeper design is ideal revolver storage and transportation.
The high-quality, protective custom foam interior carries up to three (3) .22 caliber to .500 caliber revolvers with or without trigger locks. The NANUK 918 waterproof, dustproof and impact-resistant case accommodates revolvers with 3” to 8” barrel lengths.
The protective foam also has a pre-cut slot for a NANUK Desiccant Pack which protects revolvers from rust and corrosion caused by moisture or high humidity.
The NANUK 918 3 Up Revolver Case has two lockable options: two reinforced metal eyelets accommodate TSA-accepted case locks and TSA latch retro-fit kits which are easy to install and add an extra measure of security.
The NANUK 918 3 Up Revolver Case protective case comes with a soft grip and ergonomic handle to make it easy to transport.
It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty.
NANUK 918 3 Up Revolver Case
Specifications
16.9 in x
12.9 in x
9.3 in
429 mm x
328 mm x
236 mm
14.9 in x
9.8 in x
8.6 in
378 mm x
249 mm x
218 mm
20.6 L
6.4 lb |
2.1 in | 53 mm
6.5 in | 165 mm
Min -20°F (-29°C ) | Max 140°F (60°C)
40 lb | 18.1 kg
0.3 in | 7.62 mm
Lightweight NK-7 resin
Yes
NANUK 918 3 Up Revolver Case
Downloads
Why Choose The NANUK 918 3 Up Revolver Case?
Go where no case has gone before.
IP67 Waterproof & Dustproof
Keep your case from sealing shut. Automatically.
Automatic Pressure Release Valve
Close with confidence. Open with ease.
PowerClaw Superior Latching System
Get High-Impact Protection with a fraction of the weight.
Indestructible & Lightweight NK-7 Resin
Stand out with a unique design and color selection.
Design & Colors
Reinforced stainless-steel eyelets with a diameter of 8.5mm/0.34” can be used to secure additional padlocks.
Reinforced Metal Padlock eyelets
Customer Reviews
