This case fits all DJI™ Phantom models including 3, 4 Pro, 4 Pro +, 4 Pro + 2.0 and 4 RTK
Built to organize, protect, carry and survive tough conditions, the NANUK 950 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 950 DJI™ Phantom drone case saves you time. It’s big enough that you can keep your propellers on the Drone and still has enough room to fit the prop guards in a side pocket. The custom foam was made for the DJI™ Phantom 4 but will also fit the DJI™ Phantom 2 and Phantom 3, Phantom 4, 4 Pro, 4 Pro+, and 4 RTK.
This case is military grade and made for professional use. Never worry about extreme vibration or or dropping your Phantom during travel again.
Made from the light but ultra-strong NK-7 resin, the NANUK 950 is our largest case made to fit multipleDJI™ Phantom drone models and all accessories you need for your next professional shoot or 3D mapping. The maximum level of protection for DJI™ Phantom Drones and accessories in a custom-designed protective case.
The high-quality, closed cell foam is pre-cut to specifically organize and protect Phantom drones and accessories.
The clever design holds the aircraft, four (4) batteries, one (1) controller, 1 display (iPad mini), and smaller charging or storage accessories securely. Built for professional photographers, videographers and drone pilots of all kinds, the NANUK 950 for DJI™ Phantom drones is trusted to protect and to withstand all kinds of abuse so your gear doesn’t. Professionals trust NANUK to protect their valuable gear.
The NANUK 950 DJI™ Phantom drones protective case comes with a soft grip and ergonomic handle to make it comfortable and easy to transport.
It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This protective case is also equipped with an automatic pressure release valve and two stainless steel reinforced eyelets that can be used to secure padlocks.
This MIL-Spec injection molded case is backed by a lifetime warranty to keep your gear safe for your next shoot or search and rescue mission.
- Interior (LxWxH) 20.5 × 15.3 × 10.1”
521 x 389 x 257 mm
- Exterior (LxWxH) 22.8 × 18.3 × 11.7”
579 x 465 x 297 mm
- Lid Depth 2.1" | 53 mm
- Base Depth 8.0" | 203 mm
- Internal Volume 3168 cu.in | 1.83 cu.ft | 51.0 L
- Weight (empty) 15.1 lb | 6.8 kg
- Temperature Range Min -20°F (-29°C ) | Max 140°F (60°C)
- Material Lightweight NK-7 resin
- Max buoyancy 110.0 lb | 49.9 kg
- Padlock Holes Diameter 0.340"
- Handle height from ground 32" | 37.5"
- Airline carry-on No*
*Check with your airline carrier before travelling.
- Interior (LxWxH)
- Interior (LxWxH)
- Exterior (LxWxH)
- Exterior (LxWxH)
- Lid Depth
- Base Depth
- 20.5 × 15.3 × 10.1”
- 521 x 389 x 257 mm
- 22.8 × 18.3 × 11.7”
- 579 x 465 x 297 mm
- 2.1" | 53 mm
- 8.0" | 203 mm
- 3168 cu.in | 1.83 cu.ft | 51.0 L
- 15.1 lb | 6.8 kg
PowerClaw Superior Latching System
Close with confidence. Open with ease.
Ensuring that your smaller gear stays well protected from the elements, the NANUK 950 for DJI™ Phantom 4 RTK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
IP67 Waterproof & Dustproof
Go where no case has gone before.
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Indestructible & Lightweight NK-7 Resin
Get High-Impact Protection with a fraction of the weight.
Impact-resistant, lightweight, and armed with NK-7 resin body, the NANUK 950 for DJI™ Phantom 4 RTK protective case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Design & Colors
Stand out with a unique design and color selection.
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case. Color options range from emergency red to military olive, meaning that you can blend in or stand out, whatever the task entails.
Automatic Pressure Release Valve
Keep your case from sealing shut. Automatically.
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Guaranteed for life
NANUK cases are designed and manufactured in Canada and are tested in some of the harshest conditions, including our own backyards. Every NANUK case comes with a lifetime guaranty so that if there is ever a problem with your case it will either be repaired and returned or replaced.